More chemical applications

Over the decades, Hosokawa Micron developed many process solutions that have proven successful for a wide variety of chemical processes, from lab- to production-scale installations. A selection of those process solutions is listed below or published elsewhere on this website:

  • Mixing and Extrusion (filtration) of activated carbon using an Extrudomix
  • Continuous drying of Mancozeb, an agricultural fungicide using a Drymeister (DMR-H)
  • Agglomeration of antioxidant, a food additives using an Extrudomix
  • Extrusion of copper hydroxide, a paint additive using an Extrudomix
  • Continuous drying of sulphur for the agrochemical industry using a Drymeister (DMR-H)
  • Agglomeration of calcium hypochlorite for bleach using an Extrudomix
  • Agglomeration of carbon using a Flexomix + Fluid Bed Dryer
  • Coating of cellulose using a high speed paddle mixer
  • Coating of calcium carbonate + stearate using a high speed paddle mixer
  • Extrusion of herbicides using an Extrudomix
  • Agglomeration of phosphates for fertilizers using a Flexomix + Fluid Bed Dryer
  • Mixing and extrusion of calcium carbonate for fillers using an Extrudomix
  • Continuous drying of bentonite for fillers and plaster additives using a Drymeister (DMR-H)
  • Coating of various chemicals for fire extinguishing powder using a Cyclomix
  • Continuous drying of carmine for food and cosmetics additives using a Drymeister (DMR-H)
  • Humidification of glass powder using a Flexomix
  • Homogeneous (back) mixing of calcium carbonate using a high speed paddle mixer
  • Agglomeration of phosphates for industrial detergent using a Flexomix
  • Agglomeration of borate for pesticides using a Flexomix + Fluid Bed Dryer
  • Agglomeration of WDG / WSG for pesticides using a Flexomix
  • Mixing of chemicals with minerals for pesticides using a Conical Paddle Mixer
  • Continuous drying of ceramic pigment for colouring plastic using a Flash Dryer
  • Mixing of resin, pigments and additives as pre-mix for extrusion using a Nauta mixer
  • Mixing of uranium oxide with plasticiser for press powder using a Nauta mixer
  • Mixing / homogenisation of TAED using a Flexomix
  • Coating of toner with additives using a Cyclomix
  • Pre-mixing of raw materials for toner using a Cyclomix
  • Mixing of phenol resins for toner / powder coating base using a Nauta mixer
  • Intensive mixing of zinc oxides for UV absorber using a Cyclomix

This selection is incomplete. If you did not find your particular application, that does not mean we haven't done or can't do it! Please contact us and discuss with our experts or schedule a test.

How can we help you?

For more information or to schedule a test, contact our Chemicals team 
at +31 314 373 460 or fill out our contact form.